FEATURES :
Frequency Adjustment: Users can adjust output frequency
of the controller to best vibration frequency of the vibratory feeder
to get smooth, quiet and energy-saving feed effect.
Automatic Voltage Regulation: Eliminate both feed
speed variation causea by mains voltage fluctuation and beat effect
caused by industrial AC frequency.
Soft Startup: In order to avoid sudden shock to lhe feed
material and vibratory feeder, the controller can gently increase
output voltage from 0 to the preset value when startup.
Remote ON/OFF Control: The controller has 2 groups of
ON/OFF conlrol ports. Switch sensor ot PLC can be connected to
them to turn on/off the controller.
Photoelectric ON/OFF Control: The CUH Intelligent
Photoelectric Sensor can be connected to turn on/off the controller.
Remote Speed Control: Output Vol!age of the controller
can be adjusted remotely by an external potentiometer. a PLC. or a
1-5V DC signal.
24V DC Control Output: The controller can output 24V DC power associated with logical relation setting of the ON/OFF Control to drive a solenoid, an electrical relay or other external devices.
Control Panel lock: Lock all buttons on the conttol panel by
pressing the ON/OFF button and hold for 2 seconds to prevent
misoperation.
Max Adjustable Output Voltage: Max Adjustable Output
Voltage can be preset to protect the vibratory feeder from damage
caused by high voltage.
Overheat Protection: If internal temperature of the
controller gets too high. the conttoller will stop its output to protect
itself.
Overcurrent Protection: If output current exceeds its rated
value by Misoperation, the controller Will stop its output to protect
the controller and vibratoty feeder.
Short-Circuit Protection: lf output of the controller is
short -circuited, the fuse inside the controller will be blown to
protect the controller and vibratory feeder from further damage.
| Optional Accessorie | |
 |
|
Dimensions: 190*147. 8*94.5(L*W*H, mm) |
ITEM |
Range |
Unit |
Description |
|
Min |
Max |
|||
Input voltage |
85 |
260 |
V |
AC RMS Value |
Output voltage |
0 |
260 |
V |
Less than 150% Input voltage |
Output Current
|
0 |
1.5 |
A |
SDVC31-S |
0 |
3.0 |
A |
SDVC31-M | |
| Output Frequency | 40 | 400 | HZ | |
| OutPut Power | 0 | 330 | VA | SDVC31-S |
| 0 | 660 | VA | SDVC31-M | |
Output Waveform |
Sine |
|
|
|
| Voltage adjustmen Accuracy | 1 | V | ||
| Frequency Adjustment Accuracy | 0.1 | Hz | ||
| ON/OFF Delay | 0 | 20 | s | |
| ON/OFF Delay Accuracy | 0.1 | s | ||
| Soft Startup Time | 0 | 10 | s | |
| DC Control output Voltage | 22 | 26 | V | DC output associated with ON/OFF control |
| DC Control output current | 0 | 200 | mA | |
| Stand by Power Consumption | 1.5 | 3 | w | |
| Display Method | 5 | Digit | LED Digital Tube | |
Control Method |
1-5 | V | Remote Speed Control Voltage |
|
| Standard TTL Electric Level | Switching Signal | |||
| / | 6 Buttons + LED Screen | |||
Work Space |
-10 |
60 |
°C |
Non-Condensing |
Work Space Humidity |
10 |
85 |
% |
|
