Vibrator Controllers CUH Make - SDVC31-S :1.5A, SDVC31-M:3.0A


We are Authorised Dealer, Distributor, Supplier of Vibrator Controllers CUH Make - SDVC31-S :1.5A, SDVC31-M:3.0A and our setup is situated in Pimpri Chinchwad near Pune, Maharashtra, India.


SDVC31-S :1.5A / SDVC31-M:3.0A

FEATURES :
Frequency Adjustment: Users can adjust output frequency of the controller to best vibration frequency of the vibratory feeder to get smooth, quiet and energy-saving feed effect.

Automatic Voltage Regulation: Eliminate both feed speed variation causea by mains voltage fluctuation and beat effect caused by industrial AC frequency.
Soft Startup: In order to avoid sudden shock to lhe feed material and vibratory feeder, the controller can gently increase output voltage from 0 to the preset value when startup.

Remote ON/OFF Control: The controller has 2 groups of ON/OFF conlrol ports. Switch sensor ot PLC can be connected to them to turn on/off the controller.
Photoelectric ON/OFF Control: The CUH Intelligent Photoelectric Sensor can be connected to turn on/off the controller.

Remote Speed Control: Output Voltage of the controller can be adjusted remotely by an external potentiometer. a PLC. or a 1-5V DC signal.

24V DC Control Output: The controller can output 24V DC power associated with logical relation setting of the ON/OFF Control to drive a solenoid, an electrical relay or other external devices
Control Panel lock: Lock all buttons on the conttol panel by pressing the ON/OFF button and hold for 2 seconds to prevent misoperation.
Max Adjustable Output Voltage: Max Adjustable Output Voltage can be preset to protect the vibratory feeder from damage caused by high voltage.
Overheat Protection: If internal temperature of the controller gets too high. the conttoller will stop its output to protect itself.
Overcurrent Protection: If output current exceeds its rated value by Misoperation, the controller Will stop its output to protect the controller and vibratoty feeder.
Short-Circuit Protection: lf output of the controller is short -circuited, the fuse inside the controller will be blown to protect the controller and vibratory feeder from further damage.

 



Optional Accessorie
Optional Accessorie

  • Intelligent Photoelectric Sensor (1.2m)

 


Dimensions: 190*53.6*94.5(L*W*H, mm)

Weight: SDVC31-S:560g(without accessory)
SDVC31-M:610g(without accessory)



TECHNICAL SPECIFICATION

      ITEM

Range

 

Unit

 

Description

Min

Max

Input voltage

85

260

V

AC RMS Value

Output voltage

0

260

V

Less than 150% of Input voltage

Output Current

 

0

1.5

A

SDVC31-S

0

3.0

A

SDVC31-M
Output Frequency 40 400 HZ  
OutPut Power 0 330 VA SDVC31-S
0 660 VA SDVC31-M

Output Waveform

Sine

 

 

Voltage adjustmen Accuracy 1 V  
Frequency Adjustment Accuracy 0.1 Hz  
ON/OFF delay 0 20 s  
ON/OFF Delay Accuracy 0.1 s  
Soft Startup Time 0 10 s  
DC Control output Voltage 22 26 V DC output associated with ON/OFF control
DC Control output current 0 200 mA
Stand by Power Consumption 1.5 3 w  
Display Method 5 Digit LED Digital Tube

 

 

 

Control Method

1-5 V

Remote Speed

Control Voltage

Standard TTL Electric Level   Switching Signal
      6 Buttons + 2LED screens

Work Space
Temperature

-10

60

°C

 

Non-Condensing

Work Space Humidity

10

85

  %

 

 

Request a Quote